Hiding Objects













A multidirectional `perfect paraxial’ cloak using four lenses. From a continuous range of viewing angles, the hand remains cloaked, and the grids seen through the device match the background on the wall (about 2 m away), in color, spacing, shifts, and magnification. // photo by J. Adam Fenster / University of Rochester



‘Cloaking’ device uses ordinary lenses to hide objects across range of angles

Inspired perhaps by Harry Potter’s invisibility cloak, scientists have recently developed several ways—some simple and some involving new technologies—to hide objects from view. The latest effort, developed at the University of Rochester, not only overcomes some of the limitations of previous devices, but it uses inexpensive, readily available materials in a novel configuration.


Doctoral student Joseph Choi is pictured
with a a multidirectional `perfect paraxial’
cloak using 4 lenses.
In order to both cloak an object and leave the background undisturbed, the researchers determined the lens type and power needed, as well as the precise distance to separate the four lenses. 

To test their device, they placed the cloaked object in front of a grid background. 

As they looked through the lenses and changed their viewing angle by moving from side to side, the grid shifted accordingly as if the cloaking device was not there. 

There was no discontinuity in the grid lines behind the cloaked object, compared to the background, and the grid sizes (magnification) matched.

The Rochester Cloak can be scaled up as large as the size of the lenses, allowing fairly large objects to be cloaked. And, unlike some other devices, it’s broadband so it works for the whole visible spectrum of light, rather than only for specific frequencies.

Their simple configuration improves on other cloaking devices, but it’s not perfect. “This cloak bends light and sends it through the center of the device, so the on-axis region cannot be blocked or cloaked,” said Choi. This means that the cloaked region is shaped like a doughnut. He added that they have slightly more complicated designs that solve the problem. Also, the cloak has edge effects, but these can be reduced when sufficiently large lenses are used.





In a new paper submitted to the journal Optics Express and available on arXiv.org, Howell and Choi provide a mathematical formalism for this type of cloaking that can work for angles up to 15 degrees, or more. They use a technique called ABCD matrices that describes how light bends when going through lenses, mirrors, or other optical elements.

While their device is not quite like Harry Potter’s invisibility cloak, Howell had some thoughts about potential applications, including using cloaking to effectively let a surgeon “look through his hands to what he is actually operating on,” he said. The same principles could be applied to a truck to allow drivers to see through blind spots on their vehicles.

Howell became interested in creating simple cloaking devices with off-the-shelf materials while working on a holiday project with his children. Together with his 14 year-old son and Choi, he recently published a paper about some of the possibilities, and also demonstrated simple cloaking with mirrors, like magicians would use, in a brief video.


To build your own Rochester Cloak, follow these simple steps:


For their demonstration cloak,
the researchers used 50mm achromatic doublets with focal lengths f1 = 200mm and f2 = 75mm


Purchase 2 sets of 2 lenses with different focal lengths f1 and f2 (4 lenses total, 2 with f1 focal length, and 2 with f2 focal length)
Separate the first 2 lenses by the sum of their focal lengths (So f1 lens is the first lens, f2 is the 2nd lens, and they are separated by t1= f1+ f2).
Do the same in Step 2 for the other two lenses.
Separate the two sets by t2=2 f2 (f1+ f2) / (f1— f2) apart, so that the two f2 lenses are t2 apart.

NOTES:

Achromatic lenses provide best image quality.
Fresnel lenses can be used to reduce the total length (2t1+t2)
Smaller total length should reduce edge effects and increase the range of angles.
For an easier, but less ideal, cloak, you can try the 3 lens cloak in the paper.



Setup of the multidirectional `perfect paraxial’ cloak as seen from the side. Laser shows the paths that light rays travel through the system, showing regions that can be used for cloaking an object. // photo by J. Adam Fenster / University of Rochester
Tags: featured-post, Institute of Optics, John Howell, research finding, School of Arts and Sciences
Category: Featured

Contact Author(s)
David Barnstone
585.276.6264
 dbarnsto@ur.rochester.edu




  Scholeio.com    

Δεν υπάρχουν σχόλια: